欢迎光临东莞金塑颜塑胶科技有限公司!

颜料配色定制
色母粒定制     13925556189
红外线塑胶     0769-2204898
塑胶改性抽粒

当前位置:首页 > 新闻中心 > 行业动态

Bright Red Granules Masterbatch Proportion

文章出处:本站原创 责任编辑:kefu 发表时间:2019-12-17 08:23:35【

The basis for determining the use ratio of the bright red granules masterbatch is to obtain a satisfactory coloring effect.

As long as the surface of the product is uniform in color and there are no streaks and spots, it can be recognized.

1:10 Unless the mixing property of the equipment is very good, the uneven dispersion of the pigment is likely to occur,

and it is generally not recommended for the customer to use this ratio.

1:50 is used for coloring general plastic products, PE and PP color masterbatch are used more.
1:33--1:25 for PO products with higher coloring requirements, lower coloring requirements or general ABS products
1:20 is used in advanced plastic products, including PO and ABS, which can be widely used in injection molding,
blow molding, spinning and other processes.
1:20 or more is generally used for coloring high-grade cosmetic containers, and is more used in small injection molding machines.
You are thinking about how to save the production cost to maximize your profit. If yes,
CACO3 filler bright red granules masterbatch is designed to be used in blown film, injection molding,
extrusion to replace the virgin proportion in the final product. The recommended dosage is 25-60 percentage so that you can cut a lot of production costs.
此文关键字:Bright Red Granules Masterbatch,Red Granules Masterbatch,Granules Masterbatch,

网站首页| 关于我们| 产品中心| 公司环境| 新闻资讯| 行业动态| 常见问题| 联系我们

金塑颜

扫一扫

本站关键词:色母